Bought as the first genuine tuning of the Honda gb350c. There was no other option at the time. It was quite easy for individuals to install and works well. However, since it is type c, another converter is required when using type a. And I think the power is a little weak due to the nature of the bike
View Detail
- Instock
1,432,341.9 LAK (9,900 JPY)
Webike Point: +99 pt
(14,323.41 LAK)
Delivery Information
In Stock (Partner's Warehouse), Ships around 23rd Jul. 2025
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
GB350
23 [Applicable No.] NC59-1100001-
-
GB350S
23 [Applicable No.] NC59-1100001-
-
GB350 C
[Applicable model number]NC64-1000001-
Product detail
[Manufacturer's Part Number] 08U70K0Z900
Rating:Available up to 7.5W (5V1.5A)
Installation time:0.5H
**There may be changes in product specifications due to the manufacturer's reasons.
.
・The Type-C connector can be inserted regardless of the front or back of the connector, reducing the hassle when connecting.
・It automatically detects the connected device and provides the optimal power supply.
・Stock and easy to use meter side mount.
・A rubber cap is included to prevent foreign objects from entering.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA GB350 C [Applicable model number]NC64-1000001-, HONDA GB350S 23 [Applicable No.] NC59-1100001-, HONDA GB350 23 [Applicable No.] NC59-1100001-
Installed on: HONDA GB350C
Fits:HONDA GB350 C [Applicable model number]NC64-1000001-, HONDA GB350S 23 [Applicable No.] NC59-1100001-, HONDA GB350 23 [Applicable No.] NC59-1100001-
Installed on: HONDA GB350C
Jan 27, 2025
Installation time 20 minutes. No fast charging.
I installed this part on the GB350C. The GB350C's instrument panel mount has a cover. First, remove the negative side of the battery. Loosen the bolts on both sides of the headlight and remove the headlight. Then, as shown in the first picture, remove two bolts from the back cover of the instrument panel. Then, you will see the instrument panel mount like a regular GB350. Remove three bolts here. First, remove the existing instrument panel. Be sure to replace the provided back panel first and assemble it. Then, put the rubber cover on the USB charger and attach it to the back panel. If the order is changed while you are assembling, you will experience a lot of inconvenience. It can be easily removed by removing the two bolts of the headlight and pulling down the front of the light. Unplug the connector of the light and remove it. An extra power cord is kindly exposed inside the light. Connect the red of the product to the black & red and the green of the product to the green wire. Reconnect the negative side of the battery and test it. Check the operating status and reassemble in reverse order. When reassembling, the wires inside the light must be evenly distributed left and right so that the light can be assembled. The clean appearance is satisfactory, but the charging speed is not fast, and the rubber material of the USB cover is very disappointing. It seems that the manufacturer should improve this in the future. * For reference, the wiring can be organized neatly if you use the rubber band attached to the original condition.
View DetailHelpful?
New Custom Articles
