6,726,789.3 LAK
(48,300 JPY)
6,434,320.2 LAK
(46,200 JPY)
(4% OFF)
5 (6 Reviews)
Excellent
Although the used triumph muffler was attached, he wanted to make it different touch and it purchased before.
Compared with before, it was not thought that sound was also large.
Appearance is quite smart.
There is also little backfire and the tAlthough the used triumph muffler was attached, he wanted to make it different touch and it purchased before.
Compared with before, it was not thought that sound was also large.
Appearance is quite smart.
There is also little backfire and the touch which became quick carries out it.
Reviews For Peyton Place Stainless Steel Norton Type Slip-on Exhaust From Other Webike User
Very Good
Like Chalk and CheeseWell packed and arrived 4 days after processing. Out of the box it’s evident that it is a quality fabrication. Heavy and solid, not tinny or fragile in any wayt. Once on the bike after 15 minutes (and three bolts) the difference between the OEM exhaust and the Peyton Place pipe is jaw dropping. The 400 thumper now snarls on hard acceleration and purs with menace at idle. Sounds similar to a Huey from the Vietnam war in the mid range revs. Slight backfire evident on deceleration. I may need to bung up the AFI to compensate. It’s a loud but refined muffler. So loud I’m hoping I won’t get any extra attention from the po po. View Detail
Excellent
The exhaust that transformed my bikeLove this Peyton Place Stainless/Norton Type Slip-on Silencer (part SP-055). I'm not sure about the difference between the carburettor and FI versions of this pipe, but as my bike is a 2014 SR400 FI I went for the FI version. Out of the box, it is extremely well made, installation was 20 minutes and immediately my bike is transformed into a machine that can be heard above the engine noise! It is LOUD on hard acceleration but mild acceleration and deceleration provide a deep, meaty tone to my SR400. Expensive but worth it! View Detail
Very Good
SR400Injection into a car.I installed it in SR 400 fi car of 2016.
I also considered Megaphone of Planas, but it was expensive as to whether the sound is too Gentle, so I made it to this Norton type.
It is not possible to compare because there is no SR ride around, it was pretty excitement because I bought it with just the sound of YouTube but it is an Exhaust System that exceeds expectations to the Large width!
If you are talking about sounds, Helicopter (Lol) Supapapa is a crisp Sound.
It is perfectly comfortable to climb the pass loosely around 4 th gear 3000 rpm.
Compared to OEM, it gently blows up to 4500 rpm.
I do not feel Torque has fallen.
The fuel economy got somewhat worse.
A gold adapter bundled between Frame and Exhaust System is shipped but if you have an OEM Bracket you can install it without problems without using an adapter. If it is an OEM, we also have anti-vibration Rubber, so some is safe.
Just a small amount of exhaust leaked from the connection, I think whether Liquid Gasket combined use is better.
3 months after getting Motorcycle's license, 3 months after getting on SR.
The first Custom is this Exhaust System!
I am satisfied from my heart.View Detail
Most Viewed Reviews Of Peyton Place Slip-On Exhaust
Excellent
Sounds amazing on my ‘15 SR400I received my item very quickly, less than 5 days from ordering. This exhaust sounds amazing on my SR400. It pulls very nicely throughout the rev range and feels really good in the midrange. I did not modify fuel or timing maps. No popping or harsh noise. View Detail
Excellent
Lovely Peyton Exhaust I think it is by far the best among the sr400 mufflers. Owners of SR400 will enjoy riding a bike once you feel it after installing. Completely recommended mufflerView Detail
Average
art of PPclassic exhaust design!the exhaust sounds good, SILENT! unfortuntelly, my one is weaker than i except. it couldn't stand SR's virbation and it just broken. my bad luck?View Detail
Excellent
SR400It's much better than pure exhaust sound and feels like it's worthy of a reputation. Peyton is required for SR400. I recommend it.View Detail
Very Good
Like Chalk and CheeseWell packed and arrived 4 days after processing. Out of the box it’s evident that it is a quality fabrication. Heavy and solid, not tinny or fragile in any wayt. Once on the bike after 15 minutes (and three bolts) the difference between the OEM exhaust and the Peyton Place pipe is jaw dropping. The 400 thumper now snarls on hard acceleration and purs with menace at idle. Sounds similar to a Huey from the Vietnam war in the mid range revs. Slight backfire evident on deceleration. I may need to bung up the AFI to compensate. It’s a loud but refined muffler. So loud I’m hoping I won’t get any extra attention from the po po. View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING