421,302.08 LAK
(3,020 JPY)
335,925.63 LAK
(2,408 JPY)
(20% OFF)
5 (2 Reviews)
Very Good
Convenient for Tire replacementIt is a must-have tool for WheelBalance for Tire replacement, as it makes the removal and hammering of the balancer weight easier and more efficient for everyone.
Reviews For PROTOOLS Balance Weight Hammer From Other Webike User
Excellent
To drive and remove Wheel Balance WeightPROTOOLSBalance Weight Hammer is used for Tire exchange to remove OEM's driven balance weight.
Because it is for Motorcycle, since the width of the part that grabs the weight is about 2 cm and it is Small, it is easy to use.
Weighing measured at 436 g, there was a response, Grip's Red Vinyl Cover also slid and gripped feeling well.
Also, on the Grip side of Joint, there is a blade that can cut pasted Plate Weight.
The part of Hammer that drives Weight has a rounded and bulged shape from the center, and it is considered that it is hard to scratch the surrounding Wheel when driving Weight.
The other day, we used ZYR 1400 Tire to remove Weight when exchanging, Balance was pasted Weight.
However, the weight attached to Rim stands out (It may be a matter of concern) Since it can not be helped, I am planning to change it to the driving weight of the OEM soon.
Personally, it is very useful.View Detail
Most Viewed Reviews Of PROTOOLS Other Tools
Excellent
Versatile Holding Tool for your Maintenance Needs About quality and texture: I am happy with the quality of the band holder from ProTools, made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the band holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the band holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from ProTools that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail
Excellent
ConvenientVery useful for looking into places that are not directly visible on the reverse side.
The length of the handle and the angle of the kagami can be freely adjusted, which is useful for checking by sliding it into the desired location.View Detail
Very Good
Easy to useBrush is shaped for easy gripping and holding.
The handle is not Gold, so it is not cold and comfortable to the touch, so it is not a burden to work with.
Brush is a little hard, so it rubs well and is effective in removing stubborn stains.View Detail
Excellent
Easy to useNot bad
Spring can be conveniently installed and removed.
It is strong and will not break even if it is used for strong springs, so it can be used for exhaust springs and side stand springs.
It is safe to useView Detail
Excellent
Useful for more than just Motorcycle![How is it used?
My boss at work had one and lent it to me once, and when I picked up something in a tight spot, I decided to buy it.
I immediately bought one myself and am using it.
How was your experience with it?
When stored, it is compact and unobtrusive, but when extended, it is quite long and can pick up objects at a distance.
One item is useful not only when servicing your motorcycle, but also in everyday life.
The tip is Magnet, so it is versatile enough to be attached and picked up, or hooked and picked up.
This is one product I wish I had known existed and bought earlier.
It is inexpensive, so it is useful to keep it in your tool box in case of emergency.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING