83,562.6 LAK
(600 JPY)
66,432.27 LAK
(477 JPY)
(20% OFF)
4 (10 Reviews)
Excellent
This for KIJIMA's Silencer band![How is it used?
I used it to fix the external Silencer on my TZr50R.
KIJIMA's Silencer band70?Size (https://www.webike.net/sd/20522931/) It is used by wrapping it around the inside of the
How was your experience with it?
It was long enough for a 60mm Silencer.
I used it for KIJIMA's Silencer band, so the width is made with a good size feeling.
The width of your silencer band may be a little too wide, so please check the width of your silencer band.
How did it compare to other products?
The heat resistant Elastic band for Silencer is not so Single Body. (Other than that, KITACO has it out.) I used it for the silencer band of KIJIMA, so I added the manufacturer.
Naturally, I'm happy with the result because it's made in just the right width and looks great.
[Points to note]
As stated, the width may be a bit long depending on the Silencer.
KITACO Band (https://www.webike.net/sd/1343195/) is 25mm wide, so it is necessary to consider with that.
【Review】
The size is just right to use with KIJIMA's Silencer band.
The thickness of the Elastic band of KITACO can be selected, so I thought it would be better if the thickness of the KIJIMA one can be selected as well.
Reviews For KIJIMA Heat Resistant Rubber for Exhaust System Silencer From Other Webike User
Excellent
A little higher temperature resistance is even better.The exhaust system on my motorcycle has been changed to Other Brand Product, but it is quite hot. After running, it gets hot at a level that cannot be touched.
The rubbers sold at home center will harden and fall apart from the heat, but this product won't do that.
But the heat makes it feel a little stretched or choppy.
So there is no need to say that a higher heat resistance temperature would be better.View Detail
Very Good
The size isn't greatI couldn't identify the manufacturer of the Silencer Bracket, so The width does not match, so I cut it and forced it to fit I don't think so, but it's a bit of a shameView Detail
Excellent
Good..It is Just fit to the 30? Wide Silencer band. Since thickness is not so thick, it is easy to handle and degree of adhesion with Silencer is also good. Length is enough, so I think that it can also be used for Silencer which is quite thick.View Detail
Very Good
t=2. With 0 there is no complaints 5 starsSilencer Band Rubber attached to the Exhaust System started running and it got burned in about 15 minutes and it was so bad that Kemri got out, so I was looking for a heat resistant Elastic band and this was the only choice in Universal. t=1. It was subtle as to what would be like 5, but after all it was somewhat insufficient in thickness.
So we overlapped the remaining Band and made the gap as much as possible. There is no complaints about heat resistance. Thickness 2. I wish I had a 0 mm Lineup.View Detail
Most Viewed Reviews Of KIJIMA Other Exhaust Options / Repair Parts
Excellent
A little higher temperature resistance is even better.The exhaust system on my motorcycle has been changed to Other Brand Product, but it is quite hot. After running, it gets hot at a level that cannot be touched.
The rubbers sold at home center will harden and fall apart from the heat, but this product won't do that.
But the heat makes it feel a little stretched or choppy.
So there is no need to say that a higher heat resistance temperature would be better.View Detail
Very Good
The size isn't greatI couldn't identify the manufacturer of the Silencer Bracket, so The width does not match, so I cut it and forced it to fit I don't think so, but it's a bit of a shameView Detail
Excellent
Good..It is Just fit to the 30? Wide Silencer band. Since thickness is not so thick, it is easy to handle and degree of adhesion with Silencer is also good. Length is enough, so I think that it can also be used for Silencer which is quite thick.View Detail
Very Good
t=2. With 0 there is no complaints 5 starsSilencer Band Rubber attached to the Exhaust System started running and it got burned in about 15 minutes and it was so bad that Kemri got out, so I was looking for a heat resistant Elastic band and this was the only choice in Universal. t=1. It was subtle as to what would be like 5, but after all it was somewhat insufficient in thickness.
So we overlapped the remaining Band and made the gap as much as possible. There is no complaints about heat resistance. Thickness 2. I wish I had a 0 mm Lineup.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING