나름 감성있어요

The carbon fiber is strong and solid. Easy install by just looking at the pictures. When driving it wobbles but it is to be expected by the way of mounting, it does not untighten and keeps the mud and dirt from hitting your face as you drive. Love the look it gives my msx 125. I would recomend this product to anyone lookingg for. A solid and good looking front fender.View Detail

This fender (along with the matching rear fender) are the only aftermarket fenders I ever put on my Ruckus that actually work. Since they are high quality fiberglass they can be easily painted, but look awesome in black.View Detail

light and hard!View Detail

It looks so much better.
Instruction Manual was very thorough.

Fender is getting farther away, which is not a bad thing, but the mud splatter is great, even for just city driving.View Detail

I have been an Up Fender guy since my old ST50, so when I found out about this product, I pre-ordered it even before it was released and bought it.
The instruction manual says to prepare OEM parts for the bolt that holds the Fork Guard separately, but I had no problem with the DAX Fender bolt. However, I had no problem using the same bolt that holds the DAX Fender. I was able to install it even as an amateur, but the instruction manual is written on two A4 sheets of WhiteBlack paper and contains only one quantity of parts.:It is a little bit difficult to understand because it is explained with more than 5pcs. pictures. when I use KIJIMA's ForkEmblem together, there is a space to move Horn to the rear, but the length of Wiring of Horn is not enough. The female terminal is not L-Type, so it is not good. I will think about it a little because the Horn Relocation Kit for MONKEY125 from Emon seems to be available.

The Styling is Large compared to the OEM's wild Plastic, and the increased Clearance of the Fender and Tire makes me fantasize about the next Custom if I can make it a block tie ya ….View Detail

포쉬그립으로 엔드가 뚫려있는 그립입니다. 실수로 두개를 샀네요. 약간 길어보여서 하나는 끝을 잘라보기도 했습니다만 그럴필요 없이 기존 크기 그대로 쓰시면 됩니다. 참고로 gb350c에 장착했네요. 그립감이 상당히 좋고 쫀득한게 장착할만 합니다. 다음에 살땐 흰색 엔드가 막힌거로 사봐야겠네요. ----------------------------------------------------------These are grips with open ends, like the Posh grip. I accidentally bought two. They seemed a bit long, so I cut one off, but you can use them in their original size. For reference, I installed them on my GB350C. The grip is quite good, and the stickiness makes them suitable for use. Next time, I'll try the ones with closed white ends.Powered by Google TranslatorView Detail

처음엔 어떻게 설치해야하나 고민을 하다 실리콘을 쓰는바람에 새로 구매해버렸습니다.. 실리콘이든 동봉된 핀이든 할 것 없이 아무것도 쓰지 마시고 그냥 기존 헤드라이트를 열어서 잘 끼워넣으면 설치가 끝납니다. 좌우 끝부분 간격을 잘 맞추는것만으로도 설치가 끝납니다. ----------------------------------------------------------At first, I was worried about how to install it, but since I ended up using silicone, I ended up buying a new one. Don't use anything else, whether it's silicone or the included pins. Just open the existing headlight and insert it properly to complete the installation. Just make sure the left and right ends are spaced properly to complete the installation.Powered by Google TranslatorView Detail

허리케인 z2타입 핸들입니다. 여기에 리뷰를 남긴줄 알았는데 아니었나봐요. W800컨셉을 생각하고 장착하게되었습니다. 키가 큰 관계로 기존의 핸들은 조금 낮은 느낌에 아쉬웠는데 이 핸들로 바꾸고 나서는 훨씬 편안한 자세가 나오긴합니다. 기존의 핸들도 나쁘지 않습니다만 이 핸들로 인해 미러를 보기 쉬워지고 높은 자세로 편안한 느낌을 갖습니다. 핸들세트를 구매하실때는 반드시 연식을 확인하시기 바랍니다. 저는 연식을 미처 신경 못써서 클러치케이블을 두번 구매해버렸네요 ----------------------------------------------------------This is the Hurricane Z2 type handlebar. I thought I left a review here, but I guess not. I installed it with the W800 concept in mind. Because I'm tall, the original handlebar felt a bit low, but after switching to this one, I'm in a much more comfortable position. The original handlebar wasn't bad, but this one makes it easier to see the mirrors and gives me a higher, more comfortable position. When purchasing a handlebar set, be sure to check the model year. I didn't pay attention to the model year, so I ended up buying two clutch cables.Powered by Google TranslatorView Detail

알피엠을 보는 즐거움이 있습니다 생각보다 정확하고 예쁩니다. 본래 하나 구매했다가 커스텀을 망쳐서 추가로 구매했는데 역시 좋습니다. 순정에 딱 잘 어울리고 시인성도 좋습니다. 머플러 구조변경시에 있으면 아주 좋아요. 사진은 테두리에 크롬 스프레이를 뿌린상태지만 그냥 순정상태 그대로 사용하시길 추천드려요----------------------------------------------------------There's a joy in looking at RPMs. They're more accurate and beautiful than you might think. I originally bought one, but I messed up the customization, so I bought another, and it's just as good. It matches the stock version perfectly and offers excellent visibility. It's a great addition when modifying the muffler structure. The photo shows the chrome sprayed around the frame, but I recommend using it in its original condition.Powered by Google TranslatorView Detail

예쁘긴합니다만 약간 오염되었을때 문제가 있습니다. 제경우 설치전 약간의 오염이 있어 닦으려다보니 체크무늬가 모두 지워지는 상황을 겪었습니다. 다행히 두개를 시켰었기에 설치는 할 수 있었네요. 또한 구멍의 크기가 한국 번호판에는 맞지 않아서 따로 가공은 해야합니다. 커터칼로도 되지만 구멍을 뚫는게 더 깔끔하긴해요.----------------------------------------------------------It's pretty, but there's a problem when it gets slightly dirty. In my case, it got slightly dirty before installation, so when I tried to clean it, the checkered pattern completely disappeared. Fortunately, I ordered two, so I was able to install them. Also, the hole size doesn't fit Korean license plates, so you'll need to cut it yourself. You can use a cutter knife, but it's cleaner to drill the hole.Powered by Google TranslatorView Detail