This is one of the steel clutch plates that was purchased when replacing all the clutch parts for the fitment of a new Sigma clutch. There was nothing particularly wrong with the old clutch parts but as with a new clutch, I wanted to make it all brand new and replace all the clutch plates etc. Finding the right clutch plates for this model of bike was not hard at all. I used the tools Webike provide in the help section and cross referenced with Yamaha schematics. The price for this clutch steel plate was really good value, especially as you do need a full set which includes various ones. There was only 1 of these steel plates needed. I had these all shipped together so I knew they would all arrive at the same time. This meant, I could crack on and do the full fitment without having to wait. EMS shipped my order and all the parts arrived in 5 days. Everything was very well packaged and there was no chance of any damage. Webike warehouse used a lot of bubble wrap. Great work guys. The steel plates are really great quality and I have never had any issues with fitment or the tolerances of any clutch plates direct from Yamaha. Excellent throughout. Very pleased with the purchase. Thanks Webike and Webike warehouse.View Detail

This is a friction plate 2 that was purchased when replacing all the clutch parts for the fitment of a Sigma clutch. There was nothing particularly wrong with the old clutch parts but as with a new clutch, I wanted to make it all brand new and replace all the clutch plates etc. Finding the right clutch plates for this model of bike was not hard at all. I used the tools Webike provide in the help section and cross referenced with Yamaha schematics. The price for the clutch friction plates was really good value, especially as you do need a full set which includes various ones. There were 3 of these friction plates needed. I had these all shipped together so I knew they would all arrive at the same time. This meant, I could crack on and do the full fitment without having to wait. EMS shipped my order and all the parts arrived in 5 days. Everything was very well packaged and there was no chance of any damage. Webike warehouse used a lot of bubble wrap. Great work guys. The friction plates are really great quality and I have never had any issues with fitment or the tolerances of any clutch plates direct from Yamaha. Excellent throughout. Very pleased with the purchase. Thanks Webike and Webike warehouse.View Detail

This is one of the friction plates that was purchased when replacing all the clutch parts for the fitment of a Suter clutch. There was nothing particularly wrong with the old clutch parts but as with a new clutch, I wanted to make it all brand new and replace all the clutch plates etc. Finding the right clutch plates for this model of bike was not hard at all. I used the tools Webike provide in the help section and cross referenced with Yamaha schematics. The price for the clutch friction plates was really good value, especially as you do need a full set which includes 19 total of various ones. There were a couple of these friction plates needed. I had these all shipped together so I knew they would all arrive at the same time. This meant, I could crack on and do the full fitment without having to wait. EMS shipped my order and all the parts arrived in 5 days. Everything was very well packaged and there was no chance of any damage. Webike warehouse used a lot of bubble wrap. Great work guys. The friction plates are really great quality and I have never had any issues with fitment or the tolerances of any clutch plates direct from Yamaha. Excellent throughout. Very pleased with the purchase. Thanks Webike and Webike warehouse.View Detail

thought it was a brand new part but turns out it was used. but it was in very good condition and came packaged in yamaha original packaging. had a few small scratches on it and a little dirt near the welds where it's hard to clean. but it's still much cheaper than buying one in Europe and it's in very good condition. none of the scratches are big enough to notice once installed on the bike. it's just a good quality used part which is good for the enviroment to. View Detail

This is one of the steel clutch plates that was purchased when replacing all the clutch parts for the fitment of a new Suter clutch. There was nothing particularly wrong with the old clutch parts but as with a new clutch, I wanted to make it all brand new and replace all the clutch plates etc. Finding the right clutch plates for this model of bike was not hard at all. I used the tools Webike provide in the help section and cross referenced with Yamaha schematics. The price for this clutch steel plate was really good value, especially as you do need a full set which includes 19 total of various ones. There was only 1 of these steel plates needed. I had these all shipped together so I knew they would all arrive at the same time. This meant, I could crack on and do the full fitment without having to wait. EMS shipped my order and all the parts arrived in 5 days. Everything was very well packaged and there was no chance of any damage. Webike warehouse used a lot of bubble wrap. Great work guys. The steel plates are really great quality and I have never had any issues with fitment or the tolerances of any clutch plates direct from Yamaha. Excellent throughout. Very pleased with the purchase. Thanks Webike and Webike warehouse.View Detail

One of my springs for the Akrapovic exhaust took a little damage due to a rock in the road. There was no saving that one so I decided to buy a few spares for it. I found the right length by checking Webike site and found the correct ones to replace. The price from Webike was really good value and as I was already ordering other parts, the shipping cost was a lot less that anticipated. I use EMS as they just get my orders to me fast. In 5 days from shipping, the springs arrived. They were well packaged by Webike and were inside a bubble wrap envelope too. The springs measured exactly what I needed for the replacement. The quality is superb and look such a good set of springs. The rubber sleeves are well made and the logo is loud and proud on them. The actual spring is a tough one and takes a bit of force to get it attached to the mount points. This is good in my opinion as you do not want them popping off during a ride out. All in all, I am very happy with this purchase, thank you Webike for taking the care with my order. View Detail

As with a lot of these older bikes, at some point you just want to spruce them up a bit. This is where we are at with this YZF-R1 2010 model. The crankcase covers were not too great and getting them replaced and not just repainting was a far cheaper alternative. I found the right part number by checking Yamaha schematics and then inputting that on Webike website. The price Webike had this for was fantastic value for money and better than I could source locally. After adding to my basket, the other parts I needed to order for this bike were all shipped together. This saved on shipping costs and I know that all the parts I need for this job would arrive tat the same time. After only 5 days my order arrived in the UK. The parts were all professionally packaged and there was no signs of damage to the box or contents. This crankcase cover was inside a sturdy Yamaha box. The finish on the cover was a lovely satin black which seems to be the norm for most Yamaha covers. The workmanship on this crankcase cover is excellent but you would not expect anything other than that from Yamaha. A great Japanese company. The alignment was spot on and after adding the gasket for this, the job was complete. One happy customer. Thanks Webike.View Detail

This thing of beauty came in with a lever holder issue where it had eventually given up the ghost and snapped at the wire input slot. Not really an issue as you can still buy the replacements and are OEM. Finding the right one was a little tricky but eventually I got there. Webike did stock these which was great news and the price was ridiculously cheap. Along with some other parts in my order, I got them all shipped using EMS, which is now my preferred courier. They just get the job done fast. 5 days after being shipped my order arrived. All the parts were free from any damage and were in perfect order. This lever holder is nothing too special but it also holds the clutch cable and so needed to be right. It has a nice satin black painted finish, all the threaded holes are well machined and it went onto the bars really easily. The time consuming part is removing all the switch gear to get this put on. Massive difference now it looks like the bike is 10 years younger. Very happy with this small purchase, thanks Webike. View Detail

At the time of inspecting this bike as it was due for the MOT, I found that not only was the belt toast but the disc brake was also in need of attention. Upon closer inspection, I found after precisely measuring the tolerances that the disc was beyond it's life. No problem, I can order one from Webike. Finding the right one for this model and year was easy enough using the schematics section on Yamaha website. The part did however fit the other smaller version too so readily available. The price Webike had this for on sale was great and far better than I could source locally from the dealer. Along with some other small parts I had them all shipped using EMS. In 5b days my order arrived. Perfect condition with no problems at all. The disc was well packaged inside the Yamaha box and protected with bubble wrap that I assume Webike applied. The disc itself is a stunning piece of machining. The tolerances after checking are 100% spot on to what they should be from new. The disc face is super well machined and there was no swarf or dust from this process inside the box. Very happy customer right here. Fitted in no time and on the road by the end of the day. View Detail

So, this bike was in for a small check over and the owner wanted to get a protector for the screen. These do eventually get scratched so if you can stop that from happening in the first place, it's a good idea. Finding that Kawasaki actually make a genuine one for this bike was truly surprising. Anyway, finding the right one for this bike was straight forward by using the schematics for this model and year. Although the price is a little higher than some after market ones you could buy, why risk that when Kawasaki have put the time and effort into making one specifically for this model. No doubt, it will also be more hard wearing than after market ones too. Along with a couple of other smaller parts I needed, I got them al shipped using my preferred courier, EMS. They just get the orders delivered fast and with no hassle. In 5 days, my order arrived. The screen protector arrived in the Kawasaki packaging and was also kept nice and flat by Webike warehouse by adding a piece of cardboard. Very nice. The screen protector was very god quality and not as flimsy as I imagined it to be. It is a pretty tough addition. Easy to fit and does have a very slight tint to it. Very pleased with this and will be looking for genuine screen protectors in the future, especially if that happens to be a Kawasaki branded bike. Thanks Webike. View Detail