?
다시 구매합니다. 이제는 다이나 포크입니다. 스트로크 구간이 딱 맞네요! 부츠의 장착이 쉽고 편하며,,, 기분에 맞게 탈 / 부착 할 수 있어서 좋습니다.그리고 무엇보다 webike 첫 거래인데...집에까지 무사히 빠른 시간에 배송되어 기쁩니다.다음에 또! 다른 할리 데이비슨 부품을 구매하겠습니다.고맙습니다.
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON SPORTSTER Family 86-09
This product is a great item, hassle free installations. Takes no more than 30 minutes to mount as there is no need to remove forks. Quality is great so long regular cleaning and polishing is done. Also adds a great look to your 39mm forks for harley davidson models. Fork boots comes with cable ties just to make sure it is secured. Remember to clean up your forks before installation. View Detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON SPORTSTER Family 86-09
We had a lot of trouble, but I'm happy to report that we were able to verify the effectiveness of the test in six months
For the symptoms of cracking packaged goods, please use the special adhesive for Rubber (Slightly more expensive, Blackish Material's Rubbery Glue) In addition to this adhesive, TubePuncture repair patch adhesive is also effective I think (Be careful not to adhere to the inner tube when installing the adhesive.)
Still, in my case, every time I Pitching, it opens up a little bit, even after it's fully glued, so Finally, BlackCoating's wire was used to prevent the valley of the bellows from cracking Fixed
No cracks have occurred after the glue + wire fixing treatment
BlackWire is also easy to find at home center or, if you look for it well, at the hundred-yen store
the hang is not too tight, not too loose, but not too loose so that it contracts to Smooth when the Boots is in operation Fixed
Tie Wrap fixation is also possible, but the vent holes in the Boots will allow the Tie If the wrapping is blocked up, it can cause a rupture, and the mountain part of the bellows can break off There is
The wire is thin, so it doesn't block the vent hole, and it also keeps the airflow in place and can be fixed with Recommendation
Now it's no longer a concern and the Wire has solved the problem without being noticeable
The boots themselves seem to have quite a bit of durability, and I think they can go on like this for the time being, Front If you don't want to remove the fork, you can use this Boots, but if you can work with it, you can also use this Boots, if you can remove it OEM or OEM Shape equivalent is appropriateView Detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON SPORTSTER Family 86-09
Even with the use of glue, it still started to crack with Packli
I thought about abandoning it, but at the last moment, I had to wage the valley! Healed
The use of Tie Wraps is not recommended because the width and thickness of the tie wraps inhibit the shrinkage and breathability of the Boots I used it and it seems to be very well salted
Packed disease is caused by a lack of design, precision and strength in the product's biting area, as well as excessive product strength and hardness I think it's because of the material and bonding method and airtightness of
Particularly on vehicles with a softer suspension setup, only using water for the manufacturer's recommended installation method I think it's a frequent occurrence
It's not a compatible car model, but many people seem to be diverting it, and the Size is just about perfect It's a shameView Detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON SPORTSTER Family 86-09
The structure is similar to the Drasha Split Boots for cars
The above-mentioned items are used with strong adhesion, but they are surprisingly durable enough to be used by people in the mechanics' business I bought it
Is the ride hard? The first time I installed it according to the manufacturer's instructions, using water, but then I had to repack it several times It comes cracking, so I finally attached them together with synthetic rubber adhesive
From the looks of it, it looks like it's better to use glue, but if that doesn't work, you should consider using glue as well as Drusilla I am
I used it on ESTRELLA, but it seems to be a good way to fix Boots in place with a little bit of shrinkage after complete adhesion It is
It is not bad, although it is a little bit thickly built and has a thicker flesh that seems to have high durability and is a volume up image I think
But after installation maintenanceetc., remove the Fork and use the normal I think it's a no brainer to use OEMBootsetcView Detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON SPORTSTER Family 86-09
When installing at a cheap price for the price, Spec. Tie Wrap is outstanding and honestly disappointing
It's a Recommendation for those who want to easily install Boots as they are easy to installView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING