1,689,217.96 LAK
(12,129 JPY)
1,536,019.86 LAK
(11,029 JPY)
(9% OFF)
4 (11 Reviews)
Very Good
Good for the priceAfter plenty of adjusting it seems to be within tolerances. I tested it against a digital torque wrench to see how close it is. After numerous adjustments and tests it seems to be okay. My things aren't going to the moon so I. can sacrifice a little accuracy. Don't like the lock screw on the bottom though.This is exactly what I needed, I have used it several times and it has performed perfectly every timeJust did a full rebuild and this was the perfect piece to have. You definitely need to make sure your bolts are to spec.
Reviews For KITACO Torque Wrench 380mm 3/8 DR10-80N From Other Webike User
Excellent
保养机车的好帮手我喜欢自己保养摩托车,虽然很多人说用普通工具就行,但我觉得我需要一把好用的扭力扳手。我在webike上购买了这只KITACO 扭力扳手,这支扭力扳手是10-30牛米,一般日常换机油等保养足够了,调节扭力简单,读数一目了然,精度也不错。View Detail
Average
Good, but not great.I'd like to get a Torque wrench, but I'm not sure if it's a cheap one from Home centeretc. …
I think it's good for people who
I think the range of Torque measurement is also just right for Motorcycle.
The only complaint I have is that it is difficult to understand the feeling of the power escaping when you reach the specified torque.
It's not a problem once you get used to it, but it may be confusing at first!View Detail
Excellent
Great for motorcycle tinkering.[How is it used?
Was the one you received as per Image? Yes
How was your experience with it? The best
[Points to note] None
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the ManufacturerView Detail
Very Good
You should have it for DIY maintenance.[Usage]
Used for the front and rear axle shaft tightening, front fork fixing, and other important security parts.
Image Street?
Almost exactly. Slightly on the better side Gap.
[Impressions of using it]
After all, it is a sense of security to be able to tighten at the prescribed Torque. When it comes to the set Torque "Cock-a-doodle-doo. The feeling that comes with the "Mere Old Man" is addictive.
[Points to note]
Because it is a large size, it might not be suitable for the use of a fine part (Bolt etc. of M6 or less).
How did it compare to other products?
The price is much more reasonable than other Brand tools. So no harm in having it!View Detail
Most Viewed Reviews Of KITACO Instrumentation Tools
Excellent
保养机车的好帮手我喜欢自己保养摩托车,虽然很多人说用普通工具就行,但我觉得我需要一把好用的扭力扳手。我在webike上购买了这只KITACO 扭力扳手,这支扭力扳手是10-30牛米,一般日常换机油等保养足够了,调节扭力简单,读数一目了然,精度也不错。View Detail
Excellent
Is goodTorque management for maintenance provides added peace of mind.
Dial is easy to read, easy to set up, solid quality, and easy to use.View Detail
Excellent
Easy to useI used to tighten it properly when changing oil, but with this product, I can now manage the torque tightly. It is easy to use and there are no problems.View Detail
Average
Good, but not great.I'd like to get a Torque wrench, but I'm not sure if it's a cheap one from Home centeretc. …
I think it's good for people who
I think the range of Torque measurement is also just right for Motorcycle.
The only complaint I have is that it is difficult to understand the feeling of the power escaping when you reach the specified torque.
It's not a problem once you get used to it, but it may be confusing at first!View Detail
Excellent
Safe for Torque ManagementI didn't use the torque wrench because I usually do light work such as changing oil or touching small bolt nuts. This time I got it for the Sub-frame installation. The Torque wrench is reasonably priced and the quality is very good. I can manage my Torque with confidence and I can do maintenance with peace of mind.View Detail
Other Reviews From NO NAME
Very Good
Priced right and no damage to the adjuster.Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View Detail
Very Good
Great safety and looks productnice and shiny replacement for the old tattered cloth renthal pad i had for years.Pad fits well on ktm. I don't love the graphics but needed it to replace the one on the bike that was falling apart. Pretty stiff foam too. I'm not sure I want my face to hit it.I wanted to buy an original product instead of a poor quality fake.Price seems high for what it is.View Detail
Very Good
Great product, great upgradeMalfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100km\h made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected.View Detail
Very Good
A must have tool for any tool box.This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING