Manufacturer's Part Number: 670991 00 01 Color: Black
*The actual product may differ in some colors and shapes due to improvements and specification changes.
Touring Custom Parts HEPCO&BECKER Speedrack EVO pillion seat replacement rear rack. When riding solo, it can be used as a rear rack by covering the pillion seat to save space. There are many hooks to fix the belt to fix the luggage, so you can use it comfortably. It takes only 30 seconds to change the device, so it is easy to replace. The following top cases can be mounted on the Speedrack. HEPCO&BECKER Top Case Journey Universal Plate Type
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
It's hard to put a bag on the Pillion Seat because of its smallness and excitement, these days The concept of solving the loading problems associated with the Sports model & the concept of "hellip It is a good product But the build quality was still overseas quality
What made you decide to buy? Move the Top case to the Pillion Seat instead of the Carrier, which is far from the center of gravity I was worried about how to process the normal seat because of the material etc For
How was your experience with it? Advantages over Rear Carriers It's not impossible to do it with the Rear Carrier, but it's much easier with no tools required It's easy to When I see the box on the carrier of the car in front of me bouncing around, I feel a sense of stability and a hellip It's harrowing There's plenty of room to spare considering the weight of a human being
Advantages over the normal seat Flat Shape Hard top panel HookPoint
Was the installation difficult? It arrived a little over a month after I ordered it, and I assembled it and now install it … I couldn't I was prepared for this, but when it is impossible to install it, it will be a shame I'll get back on my feet and look for the cause with Base only
The Hook is too wide First of all, on the front side, the hook on the loop of the body frame is extremely wide and I shaved with File and rounded the corner at the same time If it looks well, Quantity:Pair (for Left and Right) The bend angle is different in the
The legs are too long Hook is in, but this time it can't be pushed down to the locking position If you remove the legs, the lock will be engaged, which means the legs are too long Shave it off and check it against the body of the car, then adjust it so that the four legs are grounded at the same time as it locks, and then remove the legs I did
After working on the base up to this point (it took me three days), the next step is the top plate, but fortunately there were no deviations A few dents and slips etc. are well within the acceptable range The attached Sponge is attached to the inner circumference of the car to accommodate the gap between the car and the body I cut the front side thinly around the Grab Bar It has a rubber sheet on it
【Please tell me the installation point and hang】 If the legs are too long and need to be shaved, lock them in place with the Rubber feet off and from the side Measure the amount of shaving by applying a Rubber foot Finally, the lock and four legs should be grounded at the same time so that the load is not applied to the lock only Vinyl Tape is useful for the fine adjustment of the over-sharpening The rubber sheet is cut to match the shape of the front of the top plate, and is attached by shifting it by about 1cm It was
[Was the Instruction Manual easy to understand? It's only available in English version and German, but you can understand it by looking at the picture If you have a junior high school student's level of reading comprehension, you will be able to understand Large You can
[Included Parts:were they on? Bolts and nuts for assembly, Rubber feet, Sponge for sealing the gap, Hole in the top panel Cap and Emblem for attaching it to the top plate There are other parts to deal with the gap on the front side, which are extremely A separate rubber sheet is available as I mentioned above because it is not easy to use
[Was there anything that disappointed you? I thought Germany would be a little more accurate
Do you have any wishes or improvements you would like to make for the Manufacturer? Check the product thoroughly before shipping If you use it in such a way that you put the homsen box directly on it, the warp of the back end is in the way, so you can leave it flat or use it in a different way You'd better point it down or else
[Do you have any products to compare it to? None for the one and only If I had to choose, I would say Rear Carrier
[Others] The weight of the finished product is about 1.8kg Because the thickness of the top board is 5mm though it is Aluminum, it has a feeling of weight in its own way The front and rear length of the plane part is almost the same as the Normal seat seat, and it is the largest size of SHAD Base(SH48etc.) just fits in this size But Screw hole is not fit, so you need to drill it
I know it looks convenient, but what I'm still wondering about is the price I understand the effort to develop a fitting for each car type, but I would like to have more functionality It's a shame, because it would be easier to get your hands on them if they were cheaperView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!