Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
Material: SUS304 Plate thickness :0.8t All emblem colors included (black, red, blue, yellow, green)
*Emblem stickers are included in all colors.(Black, Red, Blue, Yellow, Green)
*The color tone may differ from the actual one depending on the environment of the computer you are using. *The specifications in the photos are subject to change without notice. *Since the product is made of thin stainless steel plate, the edge of the product may hurt your hand.Please handle with care. *Images may contain other colors.
The question is how to reconcile the conflicting themes of cooling efficiency and protection performance.
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc These will damage the radiator core which is made up of aluminium fins. The cooling effect is lost when the fins are crushed, and in some cases there is a risk of damaging the water line and causing coolant leakage
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
[Hexagon mesh pattern with fine center and coarse sides] This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire. The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
[There's a reason for the choice of material] In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.8t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
When I put it on as described in the manual, it made a terrible rattling sound. On the other hand, it is not good for Radiator, so I removed it. I wonder why they didn't design it in such a way that the Radiator and the Net section can be kept clear. Too bad, because the quality of the product itself is good.View Detail
I installed this product because I was worried about the damage of the Core Guard and I like it because it is not too obvious. The Core Guard is a solid product and I am very satisfied with it and I highly recommend installing it at the time of delivery, although the damage to the Core Guard will be difficult to see.View Detail
I bought it because I'm very concerned about the dirt at the Radiator and the mud splatter in the middle. Even if you wash the car, it doesn't rub off as much as you'd like and it doesn't come off clean. And of course, I didn't want stones and bugs to get into it. By installing this product, the above problems are almost gone. Some of the other products have XSR Logo in them, but I didn't like the flashy ones, so I bought this one. The price is high, but I'm happy with it. The dimensions are consistent. I think it takes about 10 minutes to install. I purchased Silver originally, but I thought that Black was better, so I purchased heat resistant paint Spray at home center and changed it to Black.View Detail
It's been 4 years since I bought the car and the Radiator fins are getting dirty and bent It was installed to camouflage The upper part is hooked to the RadiatorBody and the lower part is attached to the Polar SmallBolt & Camouflage But the Nut is too small and there is no spanner that fits it But the Nut is too small to fit the Spanner. I had no choice, so I fixed the Bolt with Radio pliers I was impressed with the etching technique of the product, no bends or bruises, it is made in Japan I was very happy with the quality of this product The value of the water temperature gauge itself is much better than before the installation than before, even if I drove through traffic jams in Tokyo in midsummer There was no change I think it probably won't affect me, Silver looks great and Motorcycling's Dress-i'm happy with the uptakeView Detail
It comes with a neat Instruction Manual, so you won't get lost in the installation process Ugh The installation itself was easy and even I, being a Sunday mechanic, had no problem with it The installation process takes about 15 minutes You do not need to remove the Cowletc The accuracy itself fits perfectly with no problems and has a high quality feel It seems to be effective enough to prevent damage to the Radiator fins It's already installed on the SP, photos are available Please take a look at them if you are considering purchasing themView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!