[Components] Main body bracket x 1, Collar x 1, Bolt x 1, Instruction manual
*Installation is done by passing the upper hook of the SBS-2 through the hole on top of the saddlebag. *It may be hard to put the upper hook through the hole, but it is used to fix the belt without using it. *Please refer to the instruction manual for installation. *Degradation and wear and tear of the product due to aging and use are inevitable. *However, the product may be damaged if it is overloaded or not used properly. *The product itself and its accessories may interfere with the vehicle body, which may cause damage to the vehicle body. *The size of the bag will interfere with the pillion step.Please note that the pillion step is not suitable for this purpose.
The long-awaited bracket for RnineT is available. The BMW RnineT.The coolness is admitted by all, but the only weak point is "I can't pack it...". This bracket is specially designed by Degner for RnineT owners, and of course it can be fitted with Degner saddlebags.RnineT's authentic look goes well with a genuine leather bag.
◆How to install the saddlebags ◆ Pass the top hook from the bottom hole to the top hole of the saddlebag and tie the anti-flap strap on the back of the bag to the support.
◆How to install the saddlebag support 1. Remove the right step from the base and the rear brake. 2. Remove the main belt from the silencer. 3. Remove the bolt at the base of the subframe.(Please remove the right side and the left side respectively.) 4. Remove the bolts that hold the seat frame and sub frame together. 5. Insert support A between the seat frame and the subframe. 6. Align the holes of the support with the bolt holes of the subframe. 7. Insert the collar between the supporter port and the bolt hole of the rear seat. 8. Align the holes and tighten the bolts that were removed in step 4.(Stock bolt) Tighten the bolts at the base of the subframe that were removed in section 9.3.(left and right) 10. Tighten the bolts removed in steps 1 and 2. 11. Fasten the collar and support to the rear seat with bolts.
Because the model Exclusive Design, the installation system was perfect, it was possible to attach a pon without any processing. The difficulty is that you need to remove Rear frame for installation, but it was necessary to remove Brake, Clutch to remove it, which was quite troublesome. Those with less maintenance experience think that it is better to be asked by the shop.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!