[Color] Black [Material] Steel [Specification] ・Reflector bracket is removable ・Blinker width (bulb-bulb): 210mm
*The reflector bracket can be removed. *Do not use a base plate or frame to attach to the license plate as it may damage the bracket.
Use the stock license plate lights, blinkers and reflectors.
By removing the rear fender, the rear area is clean! By raising the position of the license plate, the rear tire is emphasized and you can change your image to sporty. PLOT's fenderless kit minimizes the protrusion of the indicator lights to achieve a compact design while using the stock indicator lights and license plate lights. The set also includes a bracket that allows you to use the stock reflector.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
The method of installation was upgraded with animation, and it was useful Even I, who is super clumsy and poorly set up, can manage it in one hour The tool explained in the video is the best if you have it, but even the general tool was Large sturdyView Detail
Postscript, how to do it wrong. When attaching the bottom lid, the line of Blinker and the line of License Plate Light do not overlap, but if it does not make it to line up in 3 rows beautifully, Quantity attached at the back of the bottom lid : 2pc Bolt does not arrive - - - I wrote that because I had not properly passed the Blinker line through the round hole of KitBody, it interfered with the lid. If you fix it, it does not interfere perfectly, even though it thinks well, it is built.View Detail
Installation MOVIE is also open and easy to understand. Bolt to Body installing Lamps Quantity : It is good to have 2pc stuck together, because temporary tightening is easy, afterwards it is better to have a bottom lid properly, before this is made by another company Material of 13,000 yen : If you buy Plastic 's good thing, you can not afford License Plate Light by any means, and the line got out without a bottom lid, without the Reflector attachment board, and the gold was thrown that the return is also impossible. Then find PLOT's In other words, when attaching the bottom lid, the Blinker line and the line of the License Plate Light do not overlap, but if it is not made in three rows beautifully, Quantity attached to the back of the bottom lid : Because Bolt of 2pc does not reach, it is about to adjust the slack of the line or to take a little care. It will be cool though the wire is clamped between the upper and lower plates, but it will not be disconnected at this order. Quantity in front of the bottom lid : 2pc is thankful to Bolt for re-using the OEM's Bolt to tighten together with the lid, body and car body, so it is appreciated, even though Olm's Rear Fender is Bolt and Screw Too much !! Until MODEL 2017 seems to have wrapped Blinker and License Plate Light lines carefully in the side of the ECU with Vinyl Cover, but from 2018 MODEL stopped Vinyl's Cover, it was changed into a gap, CostCut? If so, Manufacturer would like to be a Compact Rear Fender like PLOT from the beginning. Then, Mr. PLOT has made Rear Fender long to prevent water from being produced. You probably do not do itView Detail
Item looks coo!l , fits perfectly even you can put your stock signal lights , license plates light and even the reflector back on . But one important thing people need to be noted . The license plate need to be drill or to be replace , because the holes are different and you can not just screw the license plate back on without making some modify . I will probably rank this item 9.5 / 10 . View Detail
I installed it after watching the movie of installation work on YouTube in advance, so it was installed as Small one hour work as I did in the Instruction Manual. I think that the work is Smooth if you arrange the proper fixtures as it is.
Accuracy is good though it is complicated shape, and consideration is made to hide Wiring as Well, it is difficult to enter water in Seat Cowl even in rainy season, and it is satisfying to have Refreshing appearance.
It is a good feeling to install as it is because Limit's clearance is between the License Plate top and the Fender Eliminator Kit, but the License Plate's Back plate (Other Company Product) It is the only regrettable thing that there was no Clearance enough to add.
Combined with Inner rear fender, the appearance is Refreshing and Well tightening impression. I'd like to check on how far it will be affected in rainy weather.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!