Example of spacer & wheel installation width (*This is for reference only.)It varies slightly depending on the year) *Gyro canopy (40mm spacer) wheel width approx. 82cm, (70mm spacer) wheel width approx. 88cm, (100 spacer) wheel width approx. 94cm *Gyro X (40mm spacer) wheel width approx. 74cm, (70mm spacer) wheel width approx. 80cm, (100 spacer) wheel width approx. 86cm *Gyro UP (40mm spacer) wheel width approx. 86cm, (70mm spacer) wheel width approx. 92cm, (100 spacer) wheel width approx. 98cm
Wheel & Spacer (Installed year and VIN) *All years of Spunky's aluminum wheels can be installed with GYRO CANOPY 40mm, 70mm, 100mm and spacers (except new 4-stroke type) *All years of Spunky's aluminum wheels can be installed with Gyro UP 40mm, 70mm, 100mm and spacers (except new 4-stroke type). *Gyro X, VIN TD01-210xxxx-TD01-260xxxx (2000-2007 Gyro X with same type of engine as canopy) can be fitted with 40mm, 70mm, 100mm and spacers for all years of Spanky's aluminum wheels (except new 4-stroke models). newer 4-stroke models are excluded) For Gyro X models with engine numbers TD01-150xxxx-TD01-180xxxx (1989-1999), 40mm spacers will interfere with the fan cover due to the different engine shape, so 70mm or 100mm spacers are recommended.
There may be some minor scratches on the tires when they were installed or imported. Tire replacement and spacer installation requires jack-up. If you are not familiar with it, please ask a professional (such as a bike shop) to do it. You are responsible for your own safety during and after installation.
*There may be changes in product specifications due to the manufacturer's reasons.
For GYRO CANOPY / X / UP 10" 8J Aluminum Wheel & Spacer 70mm Set. ・Two-tone type of popular black & silver!Because of the shape, it is full of power!
Wheel & Tire Details 10 inch 8J aluminum wheels (4 hole, PCD110) Plated center cap and plated valve Tire Manufacturers: ZHONGYA size 225/45-10, tire diameter about 46cm, tire width about 23cm
Spacer Details For HONDA GYRO (GYRO CANOPY, GYRO X, GYRO UP) 6 Hole Multi Wheel Spacer 70mm. Easy installation design, NC machining made of aluminum
Mounting bolts (stainless steel stock type bolts 6 x 6=12 bolts, nut type bolts 10mm, screw pitch 1.25 bolts 4 x 4=8 bolts) are all included. It is compatible with stock wheels 6 holes (widening the stock wheels can be also done) and aftermarket wheels PCD100 / 110 multi.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Thank you for a really high-quality product. For me the opportunity to lead a normal life by putting shirokie wheels and increase the base of the scooter Honda Giro for stability. I have no legs ...View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!