- Fits:
- SUZUKI SV400S 98-99 [Model]SV400W/SW [FNO]VK53A-100001 or later [Location]Rear
- KAWASAKI ZXR750 93-95 [Model]ZX750L1/L2/L3 [FNO]ZX750J-030001 or later [Location]Rear
- SUZUKI BANDIT250 89-92 [Model]GSF250/N/ZM [FNO]GJ74A-100033 or later [Location]Rear
- SUZUKI RGV250 GAMMA 89 [Model]RGV250K/AK [FNO]VJ21A-117639 or later [Location]Rear
- SUZUKI RGV250 GAMMA 88 [Model]RGV250J [FNO]VJ21A-100001 or later [Location]Rear
- ...and more.
Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go on a different model. This bike is one of my own which does brake heavy and thought I would...Read More - Fits:
- SUZUKI GSX-R1000 07
- SUZUKI GSX-R1100 93-99 W
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-15
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-07
- SUZUKI SV650 (1999) 99-
- ...and more.
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliableRead More - Fits:
- HONDA CBR500R
- YAMAHA YZF1000 THUNDER ACE 96-00 R
- YAMAHA YZF600 THUNDER CAT 97-00 R
- YAMAHA ZEAL 91-94
- YAMAHA GRAND MAJESTY250 5VG [Where used] Right side
- ...and more.
2010년식 GSX-1250FA 순정 마스터 실린더 대용으로 설치하였습니다. 피팅은 완벽하게 잘맞고, 브레이크 조작감도 순정과 동일합니다.
다만, 브레이크액 리저브 탱크를 핸들에 고정시키는 볼트는 동봉되지 않아서 따로 구매해야 합니다. 나사산의 피치가 맞는 것을 찾는데 여러번의 시행착오를 겪었습니다. 제품은 매우 만족합니다.Read More - Fits:
- YAMAHA XJR1300 98-99
- YAMAHA V-MAX 1200 90-00
- YAMAHA GRAND MAJESTY400 05-08 5RU [part used] Right side
- YAMAHA TRX850 95-00
- YAMAHA TX650 73 W-Disk
- ...and more.
Worked perfect on my 1980 CB750. The fitment was perfect. The adjustable lever is a brake addition to dial in the brake master cylinder to your liking. It is very responsive to your inputRead More - Fits:
- HONDA CBR500R
- YAMAHA YZF1000 THUNDER ACE 96-00 R
- YAMAHA YZF600 THUNDER CAT 97-00 R
- YAMAHA ZEAL 91-94
- YAMAHA GRAND MAJESTY250 5VG [Where used] Right side
- ...and more.
I rebuild my bike up. There were a lot of Brake Master Cylinder on the market but I was hesitant because I was dubious from their manufacturer. I found this online for my Honda Bros NT400J 1988. I'm h...Read More - Fits:
- SUZUKI Bandit 400 89-99
- KAWASAKI GPZ750R 84-86
- KAWASAKI GPZ900R 84-01
- KAWASAKI GPZ600R 85
- KAWASAKI GPz750/F 83-85
- ...and more.
This is indeed a product of FOR JAPAN MODELManufacturer.Texture, paint, and function are all fine.Since it is an angled Master Cylinder, it would be ideal for a Handlebar with a drooping end.I have a ...Read More - Fits:
- SUZUKI GSX-R1000 07
- SUZUKI GSX-R1100 93-99 W
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-15
- SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-07
- SUZUKI SV650 (1999) 99-
- ...and more.
I bought this brake master cylinder to be installed on my 2006 Honda CB400SF Hyper VTEC Spec 3. I replaced the old original stock master cylinder with the Semi Radial Brake Master Cylinder kit was per...Read More - Fits:
- SUZUKI RGV250 (Gamma) 89
- SUZUKI SV400 02 Front left side VK53A-500551 or later VK53A
- SUZUKI SV400 04 Front left side VK53A-500947 or later VK53A
- SUZUKI RGV250 (Gamma) 88
- SUZUKI RF600 94 Front left side GN76A
- ...and more.
I can't say for sure since it is a replacement from an OEM Product that has exceeded its usage limit, but the Control is good and the Front has become lighter to the point of being palpable.I think th...Read More - Fits:
- SUZUKI GSX-R400 90-94 R/SP[Position]Rear [Compatibility]◎
- SUZUKI GSX-R400 88-89 j/r [part used]rear [fitment]○ ○
- SUZUKI GSX-R250/R 89 RK [part used]Rear [fitment]○ ○
- SUZUKI GSX-R1000 93-98 WP [part used]Rear [fitment]◎
- SUZUKI GSX-R1000 89-92 k/l/m [part used]rear [fitment]◎
- ...and more.
Mega alloy (M) Before using DAYTONA Hyper Sintered Pads (H) and this is a comparison with that.When I was using H, I could not jackknife even with four fingers.M is for 4-finger hanging (Quantity:2PCs...Read More - Fits:
- SUZUKI Impulse 400 94-98
- SUZUKI WOLF250 88-90
- SUZUKI Impulse 400 05-07
- SUZUKI Inazuma 400 97-02
- SUZUKI Impulse 400 99-00
- ...and more.
I used the Red Pad last time, but since I replaced it with the WaveRotor, it started to wear out faster, so I bought it from Repeat. I bought it at Repeat because it was worn out too fast since I repl...Read More - Fits:
- SUZUKI BANDIT400V 95-97 (GK7AA)[Place of use]Rear[Required number]1
- SUZUKI BANDIT400V 95-97 (GK7AA)[Used place]Front[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Rear[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Front[Required number]1
- SUZUKI BANDIT400 95-97 (GK7AA)[Place of use]Rear[Required number]1
- ...and more.
I usually use OEM, but this is the first time I'm using OEM. OEM is getting strange wear & rust even after applying CopperGrease. I wish they didn't rust. I will replace the pad when I replace it, as ...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- SUZUKI BANDIT 1250S 12 ABS (Bandit) [GW72A] [Frame No.]GW72A-103878 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 11 ABS (Bandit) [GW72A] [Frame No.]GW72A-103358 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 09 ABS (Bandit) [GW72A] [Frame No.]GW72A-101301 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 08 ABS (Bandit) [GW72A] [Frame No.]GW72A-100874 or later ■Front double disc (2 sets of front discs are used)
- SUZUKI BANDIT 1250S 07 ABS (Bandit) [GW72A] [Frame No.]GW72A-100001 or later ■Front double disc (2 sets of front discs are used)
- ...and more.
Front brake replacement for ZrX1200DAEGIt was a replacement for the OEM, but it was more of a reliable brake pad than an amazing effect.Read More - Fits:
- SUZUKI GSF1200S 96-99
- KAWASAKI ZRX1100 II 97-00
- SUZUKI GSF750 96-00
- SUZUKI GSF1200 95-99
- SUZUKI GS400E 91-94
- ...and more.
Mounted on the rear of the ZrX1200DAEGIt was a replacement for the OEM, but it is easy to control and durable.it's recommendedRead More - Fits:
- SUZUKI GSX-R400 90-94 R/SP[Position]Rear [Compatibility]◎
- SUZUKI GSX-R400 88-89 j/r [part used]rear [fitment]○ ○
- SUZUKI GSX-R250/R 89 RK [part used]Rear [fitment]○ ○
- SUZUKI GSX-R1000 93-98 WP [part used]Rear [fitment]◎
- SUZUKI GSX-R1000 89-92 k/l/m [part used]rear [fitment]◎
- ...and more.
It was not yet time to replace it, but I wanted to improve the effectiveness of the rear brake a little more, so I replaced it. The Golden Pad that I had been using was not bad, but I felt that I had ...Read More - Fits:
- SUZUKI GSX-R600 01-03
- SUZUKI GSX-R750 00-03
- SUZUKI Goose 350 92-00
- SUZUKI Goose 250 92-94
- SUZUKI Impulse 400 Type S 94-96
- ...and more.
It was registered as a 2017 model on myMotorcycle, and I made the mistake of jumping from there to buy one with a compatible model.Only older models are supported. Please check before purchase.It is n...Read More - Fits:
- YAMAHA XJR1300 98-99
- YAMAHA V-MAX 1200 90-00
- YAMAHA GRAND MAJESTY400 05-08 5RU [part used] Right side
- YAMAHA TRX850 95-00
- YAMAHA TX650 73 W-Disk
- ...and more.
The nissin master pump is the best and a cheaper option then getting expensive ones it is very smooth and high build in quality i would highly recommend Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Read More - Fits:
- SUZUKI BANDIT400V 95-97 (GK7AA)[Place of use]Rear[Required number]1
- SUZUKI BANDIT400V 95-97 (GK7AA)[Used place]Front[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Rear[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Front[Required number]1
- SUZUKI BANDIT400 95-97 (GK7AA)[Place of use]Rear[Required number]1
- ...and more.
It is used for front brake caliper for BMW R1150R. Although it was not applicable, it was the same caliper made by Tokico, and I judged that I could use it after seeing the shape in the picture. I bou...Read More - Fits:
- SUZUKI Bandit 250 Limited 91-93
- SUZUKI GSX-R400-SP 88
- SUZUKI Bandit 250 95-99
- SUZUKI Bandid 400 Limited V 91-93
- SUZUKI Bandid 400VZ 97-99
- ...and more.
I bought it because it is Reasonable.I'm worried about being too cheap…Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING