HONDA VFR1200F Dual Clutch Transmission

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating. About the feeling of use, Two 14mm flanged bolts are needed for the new engine that I am building from newly purchased parts from Honda. They has done their job securing the bearing holder plates into the right crankcase half. Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart and the ones to purchase together to complete the installation of the flanged bolts are the radial ball bearing and bearing holder plates. Difficulty of installation, I can say the fitment of the flanged bolt for my installation was very easy due to already having access as the crankcase half is new and process is explained in the service manual which is to be tightened to the required torque value. Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda flanged bolt that will be suitable for engine builds and repairs and I do not see this being offered any elsewhere. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

Original Honda flange screw, in new condition. It arrived sealed in great packaging; well-protected. The product in question has excellent quality and finish. It fit, with high precision, on my motorcycle. I highly recommend it.View Detail

I was changing my exhaust and the muffler gaskets that were already there had suffered too much damage to reuse. Not such a problem as I know I can source these pretty easily. Finding the correct part number was fairly straight forward, I used Webike tools in the help section and cross referenced for my own peace of mind on Honda schematics. The cost from Webike was brilliant value and a little better than I could source locally. With a few other items in my order, I had them all shipped using EMS as they just do the job right. Combining items in my order also saved a bit of money on the shipping too. Bonus. My order arrived in 5 days from initial shipping from Webike warehouse. Very good timeframe from Japan to the UK. The order was packaged really well and any smaller parts were well wrapped and surrounded by bubble wrap. The gasket itself came in a Honda packet and well packed. This is a really cool looking gasket with 2 types of material. I believe these also fit a few other models apart from the CB900F. Anyway, they fitted perfectly and the exhaust once fitted back does not blow or have any leaks. Very happy with the purchase. Thank you Webike, great work. View Detail

This was another part that was needed for the CB1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

About quality and texture, I can confirm that the quality is great and that the material used is spring steel with a zinc coating.About the feeling of use, Obe left step spring was needed for my foot pegs that I am refreshing from newly purchased parts from Honda. It has done their job tensioning the step arms.Products to buy together, To be able to complete a refresh on my foot pegs a few newly purchased parts are required to be added to your cart but the most important part to go with step springs are the main step rubbers as they wear with use.Difficulty of installation, I can say the fitment of the step springs for my installation was very easy due to the ease of access and the simple nature of securing the step springs with the step bar pins to the step holders.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda step spring that is suitable repairs and I do not see the part being any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This was a part that was needed for the CBR1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

About quality and texture, I can confirm that the quality is great and that the material used is spring steel with a zinc coating.About the feeling of use, Two right step springs were needed for my foot pegs that I am refreshing from newly purchased parts from Honda. They have done their job tensioning the step arms.Products to buy together, To be able to complete a refresh on my foot pegs a few newly purchased parts are required to be added to your cart but the most important part to go with step springs are the main step rubbers as they wear with use.Difficulty of installation, I can say the fitment of the step springs for my installation was very easy due to the ease of access and the simple nature of securing the step springs with the step bar pins to the step holders.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda step spring that is suitable repairs and I do not see the part being any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

Genuine Honda Sealing Washer 34.5mm for CBR1000RR 2014This was the seal for the bolt to the oil cooler that had perished. There were a lot of leaks all over this bike and tracking them all back was a bit of a pain but needed to be done. Finding the right sealing washer for this bike was easy using the Honda schematics. Once with this part number I checked Webike and found the right one. The cost from Webike was a lot cheaper than I could have sourced locally. I did have a lot of little parts I needed for this bike and got them all shipped in the same order to save some shipping costs. Not that the shipping is expensive anyway, I use EMS and the price is cheap enough but the service is second to none that I have used from Webike. The orders arrive in 5 days from being shipped which works out perfect for me as I know when the order will arrive. The sealing washer arrived well packaged in it's own Honda packet and also inside a small plastic bag along with some of the other smaller parts to keep them safe. This seal is a little larger than some of the other ones but does looks a really precise and hard wearing one. To be fair, this does need to be pretty sturdy to be able to withstand the heat that comes off the oil cooler anyway. Fitting was pretty straight forward and not a long job at all. Thank you Webike for the care you guys take with orders. Brilliant. View Detail

Yet another seal that had perished on this lovely CBR1000RR. Not a problem as we were rebuilding it anyway so one more seal was easy enough to find. I use Honda schematics and then search the part on Webike. The price on Webike was better than I could source locally. I was buying a few other parts anyway so it just made sense to get the all at the same time and from the same company. EMS is who I use these days as they deliver my orders fast and efficiently. In 5 days my order arrived, it was well packaged and no problems with any damage. The outer seal was inside the standard Honda packet. It was also taped to a small piece on cardboard by Webike warehouse to make sure it did not bend. This is a pretty flimsy looking seal but it is strong too. No extra parts of rubber were on the seal and everything lined up and fitted perfectly. One less part to worry about now. Onto the nest. Thanks Webike. As always, brilliant job. View Detail

This was another seal that was needed for the CBR1000RR 2014 that came in for a refresh/rebuild. This seal was one the one that seals the water temperature sensor into the thermostat. It was well and truly perished and needed changing out. Finding the right one was pretty easy using the Honda schematics for the CBR1000RR 2014 model. Webike had this on sale at the time of ordering but the price was super cheap anyway. Added to the long list of parts needed for this bike I had them all shipped together. I use EMS as they just get my orders delivered in super fast time. In 5 days the entire order arrived. The packets inside were well packed and protected, including this small washer. Webike put all the really small parts inside a plastic bag to keep them safe and then inside a bubble wrap packet too. The washer is a really neat part and I think stainless steel. It is essentially a crush washer. The specifications were spot on which you would expect anyway from an OEM Honda part. The fitment was perfect and this is one less job to do before getting this bike back on the road. Thank you Webike. View Detail