Fits: HONDA VTR800 , HONDA VTR1000F , HONDA VTR1000SP , HONDA VFR400R , HONDA STX1300
quality are good but the design not good.The leg peg has a pin which located on top. when u fix the leg peg onto the socket. the leg peg is at aw ward positon. Unless the leg peg is round then it will solve the issued. most of the position as specify on the instruction manual does not allow the leg peg to be level. always at a angle.View Detail
Fits: HONDA FJS600 SILVER WING 600cc All 11, HONDA CBR600F4I 600cc All 06, HONDA CBR600F4I 600cc All 05, HONDA CBR600F4I 600cc All 04, HONDA CBR600F4I 600cc All 02
K&N engine oil filter was the recommended brand by my mechanic and I have been using it since. It just took less than 5 minutes to change the engine oil filter. So far, so good and no problem. The other reason is I am a sucker for motorcycle sticker, they don't come with the sticker over hereView Detail
Fits: HONDA CB400 FOUR 97-, HONDA CB400SF , HONDA CBR400RR , HONDA VFR400R , HONDA BROS650
逛产品时无意间发现这个东西,原来还有的脚踏!?然后就下单并装上了我的CB1300 SF,感觉特别新鲜好玩,可以方便调整成不同的高度,可以根据自己的习惯来尝试不同的骑乘姿势,TAKEGAWA武川的产品人员真是有想法。When I visited the product, I accidentally found this thing, and there are still pedals! ? Then I placed the order and installed my CB1300 SF. It feels very fresh and fun. It can be easily adjusted to different heights. I can try different riding postures according to my own habits. TAKEGAWA Wuchuan's product staff really have an idea.(translated by Google Translator)View Detail
Fits: HONDA MONKEY125 , HONDA CB750 , HONDA CB400SF , HONDA CB1300SF 98-08, HONDA CB400
Installed on my MNNTHBX rearLessSets (which retain stock Grom location) and they fit perfectly and work quite well. Wearing tennis shoes feet feel very planted. The pegs are very "grippy". Still playing with clocking them how I like them best.View Detail
Fits: HONDA FJS600 SILVER WING 600cc All 11, HONDA CBR600F4I 600cc All 06, HONDA CBR600F4I 600cc All 05, HONDA CBR600F4I 600cc All 04, HONDA CBR600F4I 600cc All 02
[How is it used?
Used when replacing Oil.
How was your experience with it?
Since the tip is in the shape of a socket, it is convenient to replace it using only the tools at hand.
(Oil filter wrench not required)
How did it compare to other products?
No difference from OEM ProductView Detail
I replaced it with a Lithium battery, which I had been holding off on installing because I didn't have anything to worry about.
I introduced the idea of less self-discharge because I have multiple cars and many periods when I can't ride much due to irregular holidays.
After installation out of the box, it was working without any problems.
However, after riding it around for half a day to test it, the battery went up in 4 or 5 days...
I had a Battery Charger, but not for Lithium battery, so I had to purchase a new one.
We thought we would wait and see how things went for a while and then get a Charger, but we had to make arrangements as soon as possible, and the unplanned expense was painful.
Charger and Quantity, as there is a possibility that the new purchase should be initially charged.:You should be thinking about buying in Set.
Voltage and Power are perfect, and I think it is satisfactory that the system can now be started with a single Cell.View Detail
It is extremely light.
Since the OEM was YT12A-BS, the weight was reduced by nearly 3Kg.
I was trying to store the ETC with the battery since the Motorcycle is hopelessly loaded under the Seat, but it worked!
I don't think starting is a problem, but there was a 3 day period of not riding and it was about 10:00 in the morning. (Not cold at all) I was in a hurry because the Engine would not start when I tried to start it on the
However, it has started normally even after a couple of days of inactivity since then.
I try to run my motorcycle at least twice a week, so I can't give an impression on the starting performance after leaving it for a long period of time.View Detail
Fits: HONDA FJS600 SILVER WING 600cc All 11, HONDA CBR600F4I 600cc All 06, HONDA CBR600F4I 600cc All 05, HONDA CBR600F4I 600cc All 04, HONDA CBR600F4I 600cc All 02
[How is it used?
The Oil Filter I usually use was out of stock for a long time, so I bought this well-known product.
I was looking for a product that can Wiring directly to Filter for Motorcycle used in Circuit.
How was your experience with it?
To be honest, I can't see what's in the Filter, so I trust the Brand name and use it.
In addition to Wiring, it is easy to use where tools can be used as they are.
If you don't run Circuit but change the Filter yourself, you can do the work without special tools.
How did it compare to other products?
nothing special
[Points to note]
nothing specialView Detail
Fits: HONDA FJS600 SILVER WING 600cc All 11, HONDA CBR600F4I 600cc All 06, HONDA CBR600F4I 600cc All 05, HONDA CBR600F4I 600cc All 04, HONDA CBR600F4I 600cc All 02
Anyway, the choice for this Filter is Bolt in the head, 17mm.
Now you don't need a Filter wrench or anything like that!
The price of the filter is high, but it will save you the hassle of changing your motorcycle and getting a bunch of Filter wrenches.
Aitia products.
Naturally, the performance of the filter paper should be high enough to be worth the price, so there is no reason for it to be bad.
There was an article on Net that checked the contents of the Filter, and it seemed that the thickness and fineness of the filter paper differed depending on the price.
But it did not fit the year of my Motorcycle. (It came on with no problem, though.)
It looks like I should Check to the year.View Detail
Fits: HONDA GOLD WING F6B GL1800B GOLD WING F6B DELUXE 1832 - All, HONDA GOLD WING F6B GL1800B GOLD WING F6B 1832 - All, HONDA GOLD WING All years GL1800 VALKYRIE 1832, HONDA GOLD WING All years GL1800A GOLD WING ABS 1832, HONDA GOLD WING All Years GL1800A GOLD WING ABS 1800
I'm not sure about the performance, but it looks Chrome and has a premium feel.
I think the price is a little high. I thought I could have used a regular Black Type.View Detail