- Fits:
- HONDA CR125 R 00-01
- HONDA CR125 R 02-03
- HONDA CR125 R 04-07
- HONDA CR125 R 98-99
- HONDA CR250 R 00-01
- ...and more.
The kit had everything needed for my replacement. The bearing pressed in nicely and is very smooth. I will purchase this product again when the time comes to replace it again.Great replacement bearing...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
The OEM hand guard rotated at the base every time the motorcycle was tipped over, and the hand guard had to be repositioned after the motorcycle was raised.The price is quite expensive, but when you b...Read More - Fits:
- HONDA CRF450R 07-21
- HONDA CRF450RX 17-21
- HONDA CRF450R 04-06
- HONDA CRF250X 04-17
- HONDA CRF250R 04-06
- ...and more.
It is a Motocrosser part, but I think it is close to OEM and has excellent cost performance. The durability will be seen from now on.Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
The clamp that came with the hand guard was said to rotate and damage the brake hose when it tipped over, so we changed to this. However, I wonder if there is a possibility of bending the Handlebar or...Read More - Fits:
- SUZUKI ADDRESSV125 [ADDRESS]. g
- SUZUKI ADDRESSV125 [ADDRESS]. sadist
- SUZUKI
- SUZUKI
- SUZUKI
- ...and more.
I can't say how I feel about it because it was damaged before I used it or installed it.Read More - Fits:
- SUZUKI ADDRESSV125 [ADDRESS]. g
- SUZUKI ADDRESSV125 [ADDRESS]. sadist
- SUZUKI
- SUZUKI
- SUZUKI
- ...and more.
Worst. I will never buy again. Never buy from them again. The ball adjusting tool is too limp to tighten it. I don't want to deal with this kind of thing.Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
good pointThe texture is good.A bad pointThe four supplied bolts are too short.It's a little expensive.Webig contacted the distributor, and the distributor sent us a Bolt of the correct size.Now, it m...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
As others have written, the Bolt is not long enough for the SEROW250…The M8×60 Flange bolt is also a pain in the ass to get, so I hope they do something about it.Do other models come with it properly?Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
The Size of the Bolt was different, but there was a response later.They sent me a Bolt of the regular Size.Read More - Fits:
- BETA RR X-trainer Full size 05-16
- BETA RS X-trainer Full size 05-16
- HONDA CR125 R 92-07
- HONDA CR1250 R 92-07
- HONDA CR80 R 98-07
- ...and more.
OEM Aluminum castings can be bent Lever if you are unlucky. Even if there is no problem in use, tensionDown.The texture of this Material is like Polyvinyl chloride.:If you use it for a long time, it w...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
The Bolt that came with it is too short, so I had to prepare it separately.The Bolt that came with it is 50mm and I need another 15mm for WR, 70mm is too long so I went with 60mm.Probably it would hav...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
The price is a little expensive and it may be a modest part, but it is well made and the ZETA mark is high quality.This is a very large and powerful item that complements the Hand guard's defensive ca...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
The upward adjustment does not work at all.Is a motorcycle with a low handle position useless?Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
Installed on XJR1300. I used TANAX's Opposite Thread Screw Adapter because I felt the overall height was insufficient and I could see right behind the limit. The design and quality is good, so overall...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
First of all, the normal Mount made by ZETA rotates a lot, as other people have mentioned in their Impressions.It has also been damaged and cracked several times.The wide adjustment range is appealing...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
I bought this product because when I use the Hand guard with Handlebar Mounting, the guard rotates and interferes with the brake hose when I roll over.Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...and more.
I installed it on my Grom and the handlebar position is too low.It is important to check the position of the handlebar on your motorcycle before purchasing.It was a good learning experience.Read More - Fits:
- SUZUKI RM250 96-03
- SUZUKI RM125 96-03
- SUZUKI DR-Z400S 00-04
- KAWASAKI KX80/II 94-97
- KAWASAKI KX85 94-97
- ...and more.
I bought it because it was a product that fit XR250 (MD30) 1997....It fits, but the brake lever doesn't have a protrusion underneath and doesn't interfere with the stop-lamp, so the lamp doesn't turn ...Read More - Fits:
- YAMAHA YZ426F
- YAMAHA YZ450F
- YAMAHA YZ250FX
- YAMAHA YZ400F
- YAMAHA YZ250
- ...and more.
The Hand guard is used on WR250X, the Accident to Machine is also a necessity to prevent injuries to your fingers and fists on the road as well as Circuit.Read More - Fits:
- HONDA CRF450R 07-21
- HONDA CRF450RX 17-21
- HONDA CRF450R 04-06
- HONDA CRF250X 04-17
- HONDA CRF250R 04-06
- ...and more.
I use this one because it's cheaper than buying the OEM.There is a solid cutout for folding and a neat bush in the pivot section.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING